How to run an Auto Load Test with 30% Load Required:

1. While on the EPMS screen and viewing a system, select the Start Event button and the platform displays the Event Setup Wizard.  
   
   
2. Select the Test Type of Load in the description. 
                     
   
3. Select the Next button and the platform displays the event configuration screen.
   
4. Use the default Report Title or change the name of the event.
   
5. Use the default email or change/add an email separated by commas to receive the event reports.
   
6. If applicable check the System Checklist items.
   
7. Select an ATS Event Group.
   
8. Use the default (suggested) Initiating ATS or select a different one.
   
9. SKIP for Auto Load Test - Select “Initiate commands through the User Interface” only if each piece of equipment will be controlled manually from the platform User Interface.
   
10. SKIP to use the default configured entries for “Block Time (sec)” and “Block Size”.
    
11. SKIP to use the default configured “Time to wait to begin event data capture (min)”.
    
12. Select the “Enforce 30% load rule to start test” for the system to start the test once the generator reaches 30% of the rated kW.
    
13. Select the Next button to continue with the Event Setup Wizard. 
    
    
14. Expand the system details by clicking on the (+) symbol next to the system name and the platform displays the event setup details.  
    
    
15. Review your selections.
    
16. Use the Previous button to make configuration changes.
    
17. Use the Cancel button to cancel the event setup.
    
18. Select the Finish Setup button and the platform will display a final confirmation screen. 
    
    
19. Select the Run Test button and the platform will start the test.