How to run an Auto No Load Test

EPMS

How to run an Auto No Load Test:

  1. While on the EPMS screen and viewing a system, select the Start Event button and the platform displays the Event Setup Wizard

EPMS – Start Event

  1. Select the Test Type of No Load in the description

Event Setup Wizard          

  1. Select the Next button and the platform displays the event configuration screen
  2. Use the default Report Title or change the name of the event
  3. Use the default email or change/add an email separated by commas to receive the event reports
  4. If applicable check the System Checklist items
  5. Select the Next button to continue with the Event Setup Wizard

Event Setup Wizard          

  1. Expand the system details by clicking on the (+) symbol next to the system name and the platform displays the event setup details

Event Setup Wizard  

  1. Review your selections
  2. Use the Previous button to make configuration changes
  3. Use the Cancel button to cancel the event setup
  4. When ready select the Finish Setup button and the platform will display a final confirmation screen

Event Setup Wizard          

  1. Select the Run Test button and the platform will start the test

Event Setup Wizard       

Warning:  the test will start after the Run Test button is selected!

EPMS 

  1. Monitor the test from the EPMS screen
  2. The platform will initiate the test and send a command to start the generator(s)
  3. The platform sets the event status to Test and the equipment status displays the number of active equipment
  4. The generator(s) will start
  5. In the equipment details the platform displays the equipment in the test with an Active equipment status
  6. Once all the generator(s) are running then the platform will pause and wait a configured period before starting the event timer
  7. When the event time remaining reaches 00:00:00 then the platform will send stop commands to the stop the generator(s)
  8. The generator(s) will stop
  9. Once the generator(s) have stopped and the cooldown has completed then the platform will end the event

Note:  the event can be cancelled at any time by clicking on the Cancel Event button.

Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.
Powered by Zendesk